🚧 Migrate from Vuex ≤ 4 🚧 #

🚧 This page is a work in progress. If something needs more clarity, open an issue. 🚧

Despite the structure of Vuex and Pinia stores being different, a lot of the logic can be re-used. This guide serves to outline the basic steps required for migrating a project using Vuex and FeathersVuex to Pinia and FeathersPinia.

File Structure #

The following structure (adapted from the pinia official documentation) shows how to migrate from modules, to the more decentralized pinia stores and how to organize them, alongside those augmented with feathers-pinia.

# Vuex example (assuming namespaced modules)
src
└── store
    ├── index.js           # Initializes Vuex, imports modules
    └── modules
        ├── module1.js     # 'module1' namespace
        └── nested
            ├── index.js   # 'nested' namespace, imports module2 & module3
            ├── module2.js # 'nested/module2' namespace
            └── module3.js # 'nested/module3' namespace
# Pinia equivalent, note ids match previous namespaces
src
└── stores
    ├── index.js          # (Optional) Initializes Pinia, does not import stores
    ├── module1.js        # 'module1' id
    ├── module2.js        # 'module2' id
    ├── store.js          # (Optional) Initializes Pinia, does not import stores
    ├── service1.js       # 'service1' id
    └── service2.js       # 'service2' id

Re-exporting stores from a single file #

Pinia is modular and composable by design, however, this makes it cumbersome to import the individual (and independent) stores when needed. The optional src/stores/index.js file is for convenience to import stores from a single file:

import { useStore1, useStore2, useStore3 } from '@/stores'

instead of:

import { useStore1 } from '@/stores/store-1'
import { useStore2 } from '@/stores/store-2'
import { useStore3 } from '@/stores/store-3'

and could look like this:

export * from './store-1'
export * from './store-2'
export * from './store-3'

Note also that re-exporting files from a single file like shown above should not break code splitting.

Setup #

For a detailed walkthrough refer to the setup guide that most matches your chosen framework.

Configuration #

Stores in pinia should be imported whenever they are to be used. You don't have to worry about performance optimizations, pinia does this under-the-hood for you.

Configuration for use in Components (.vue) #

🚧 This section is outdated and requires updating after app examples are completed. 🚧

Within components, you can instantiate stores directly with const store = useStore().

// src/stores/todos.js
import { pinia } from 'pinia'
import { defineStore, BaseModel } from 'feathers-pinia'

// avoid export Model to prevent accessing it directly and enforce access through store.Model
class Todo extends BaseModel {}

const servicePath = 'todos'

// could also directly provide the id within the options
// e.g. defineStore({ id: 'todos', ... }) or skip it and let
// feathers-pinia apply the default `service.${servicePath}`
const useTodosStore = defineStore('todos', {
  servicePath,
  model: Todo,
  state: () => ({}),
  getters: {},
  actions: {}
})

Configuration for use outside of components (.js or .ts) #

🚧 This section is outdated and requires updating after app examples are completed. 🚧

Outside of components pinia might not be registered yet, so instantiating stores require binding the pinia instance created above with const store = useStore(pinia). This is especially problematic with Vue 2 which relies on Vue.use() and the order of the ES imports/exports.

// src/stores/todos.js
import { pinia } from 'pinia'
import { defineStore, BaseModel } from './store.js'

// avoid exporting Model to prevent accessing it directly (enforce access via store.Model)
class Todo extends BaseModel {}

const servicePath = 'todos'

const useTodosStore = defineStore('todos', {
  servicePath,
  model: Todo,
  state: () => ({...}),
  getters: {...},
  actions: {...}
})

const todosStore = useTodosStore(pinia)

if (import.meta.env.PROD)
  syncWithStorageCompressed(todosStore, ['itemsById', 'tempsById'])

else
  syncWithStorage(todosStore, ['itemsById', 'tempsById'])

if (import.meta.hot)
  import.meta.hot.accept(acceptHMRUpdate(useTodosStore as any, import.meta.hot))

Important: feathers-pinia will default to an id of service.${servicePath} if no id is provided to defineStore. This makes it easy to distinguish regular pinia stores from those created with feathers-pinia.

Steps #

If you haven't completed the initial setup, please do so first.

The following steps outline the specific migration steps to apply to your codebase. The list might not be exhaustive, be sure to apply these concepts to any custom implmentation or variation you might have.

Convert your Models #

See the section on converting from Model Classes to Model Functions.

Imports #

• npm: (optionally) uninstall vuex and feathers-vuex and install pinia and feathers-pinia
• imports: find and replace all from 'feathers-vuex' with from 'feathers-pinia'

Breaking Changes #

• Add model instances to store after intantiation with instance.addToStore() (see here)
• Find and replace state, getters and actions according to this list.

Stores #

Make sure you import and create store beforehand with const <id>Store = use<id>Store

• state: find and replace all $store.state.<id>.<stateName> with <id>Store.<stateName>
• getters: find and replace all $store.state.<id>.<getterName> with <id>Store.<getterName>
• mutations: find and remove all mutations and invocations via $store.commit. Replace with actions if needed.
• actions: find and replace all $store.dispatch('<id>/<actionName>', payload) with <id>Store.<actionName>(payload)
• Now apply the aforementioned steps by replacing $store with store (without $).
• computed props from state: find and replace any object computed properties e.g. const doneTodos = computed({ get: () => $store.state.todos.doneTodos, set: (val) => $store.commit('todos/SET_DONE_TODOS', val) }) simply by accessin the reactive store directly via todosStore.doneTodos (and add this property to the state of the store). The same is true for computed props from getters.
• ModelClass: find and replace all direct access via ModelClass with store.Model. Note you could still use e.g. const ModelClass = models.api[modelName], however store must be first initialized. Accessing the Model indirectly through the store ensures the store is previously instantiated.

Common Tools #

• useFind: has been renamed to useFindWatched. The API is the same. (See here)
• useGet: has been renamed to useGetWatched. The API is the same. (See here)
• usePagination: (optional) replace custom implementations of pagination with the usePagination utility
• handleClones: the new handleClones utility removes boilerplate from the clone and commit pattern (see here)

Renderless components #

• If you where using renderless components <feathers-vuex-form-wrapper> and/or <feathers-vuex-form-input>, you can either create 2 custom components to recreate that functionality or use the recommended handleClones utility.

Tip: you can use of the find-and-replace functionality in the IDE of your choice to make this easier.

Compared to Feathers-Vuex #

Apart from being a LOT faster and having a really clean API (thanks to Pinia), there are a few breaking changes to some of the familiar processes from Feathers-Vuex.

New Model Instances Not Added to the store #

With Feathers-Vuex, when you called new Model(data), the new instance would automatically get added to the store.

In Feathers-Pinia, you have to call instance.addToStore() to manually add the instance to the store.

import { models } from 'feathers-pinia'

const todo = new models.api.Todo({ name: 'do something' })
todo.addToStore()

Calling .clone() on a clone is allowed #

In Feathers-Vuex you couldn't call .clone() on a clone. Now, calling .clone() will do the same as calling .reset().

Store Structure Changes #

Since state, getters, and actions all live inside the same Pinia store object, the getters have been renamed to avoid colliding with action names.

State #

• ids is no longer in state. It's now a getter named itemIds.
• keyedById is now called itemsById.

Getters #

• findInStore takes the place of the find getter.
• countInStore takes the place of the count getter.
• getFromStore takes the place of the get getter.
• itemIds takes the place of the ids array in data.
• items takes the place of the list getter.
• tempIds is like itemIds but for temp records.
• temps is a new array of temp records.
• cloneIds is like itemIds but for clone records.
• clones is a new array of clone records.

Actions Mostly the Same #

• find
• count
• get
• create
• update
• patch
• remove
• removeFromStore
• addOrUpdate
• addToStore is a new alias to addOrUpdate
• clearAll
• clone
• commit
• reset
• hydrateAll might be deprecated. Hydration with Pinia is as simple as Object.assign(store, data).

No preferUpdate option #

Feathers-Pinia does not have a preferUpdate option, which was available for Feathers-Vuex model instances. You can either call .update() instead of save(). Feel free to open a PR or issue if you need the feature.

Migrate handleClones #

The handleClones utility is now useClones and has a cleaner API. See the page on Migrating handleClones